Creality Monitor Pro

Creality Monitor Pro turns your Corsair Xeneon Edge into a touch control panel for your Creality 3D printer. Pause, resume or stop a print, set the cooling fan speeds and switch the chamber light - right next to the live camera, print progress and temperatures.

What's included:

- Pause / Resume and Stop; Stop needs a second tap (CONFIRM STOP) within 4 seconds

- Model, Back and Side fan sliders (0-100%); tap a fan name to switch it on or off

- Light button, shown when the printer reports a light

- Progress ring with an optional part preview, layers, nozzle, bed and chamber temperatures, elapsed and remaining time, speed, flow and Z height

- Optional live camera; if no part image is available, the ring shows NO PREVIEW

- Read-only 3D bed mesh where supported; drag to rotate, invalid data shows a warning

- State labels, strip / half-width / square / portrait layouts, view-only mode and adjustable accent color

How it works: the widget talks directly to your printer over your local network (status port 9999, camera port 8000). Enter the printer's IP address in the widget settings. No cloud, no account, no telemetry.

Requirements:

- Corsair iCUE 5.47 or newer with a Xeneon Edge touchscreen

- Creality K1, K1C or K1 Max with LAN Mode enabled, on the same network as this PC (developed and tested on a K1C)

- For the camera: enter this PC's LAN IP in the Camera settings

- Please test the free version (Creality Monitor) first to confirm compatibility and functionality with your printer.

Controls send commands to your printer; Stop cannot be undone.

Release notes (v1.0.6)

- Added a read-only 3D Bed Mesh view with coordinates, height range and a manual Refresh button, where supported

- Drag the bed mesh with a finger to rotate and tilt it in 3D; Reset View returns to the standard angle

- Invalid or missing mesh data shows a message instead of a misleading graph; no calibration is started

- Added an optional part preview inside the progress ring when the printer provides an image

- Shows the file preview during preparation and tries the sharper current-print image from the first layer