WLED Controller

Take command of your WLED lighting setup directly from your Stream Deck+ dials.

This plugin goes beyond simple buttons. It provides seamless two-way synchronization, meaning your dial stack always shows the live state of your lights—including connection status, current mode, and precise brightness levels via generated graphics.

Minimal Setup, Maximum Control Getting started is effortless. You have two ways to connect:

Auto-Discovery: Use the integrated "Turbo Network Scanner" to automatically search all your local network interfaces and find compatible WLED devices in seconds.

Manual Entry: Prefer a static setup? Simply type in your device's IP address or hostname (e.g., wled.local).

Key Features:

Rotary Control: Smoothly adjust brightness, cycle through effects, palettes, and presets with the turn of a dial.

Live Visual Feedback: The dial image is generated in real-time. You always see exactly which effect or preset is active without guessing.

MultiRelay Support: Native support for the WLED MultiRelay Usermod, allowing you to switch physical electrical relays directly from the encoder.

Smart Power Logic: Tap the touch strip to toggle power. The intelligent "Soft On" logic remembers your last brightness level or restores it to 50% if unknown.

Offline Handling: Visual indicators alert you immediately if a device loses connection.

Controls:

Push Dial: Enter "Selection Mode" to switch between Brightness, Effect, Preset, Palette, or Relay control.

Rotate Dial: Adjust the value for the selected mode (e.g., dimming or scrolling effects).

Tap Touch Strip: Toggle the device On or Off.

⚠️ System Requirements:

OS: Windows 10 or Windows 11 (macOS is currently not supported).

Hardware: Elgato Stream Deck+ (Dials required).

Device: An ESP8266 or ESP32 running WLED (v0.10.0 or newer recommended).

Initial release