Creality Monitor Pro

Creality Monitor Pro shows your Creality K1, K1C or K1 Max 3D print live on your Stream Deck and lets you control it. Every key is drawn live: progress bars, a picture of the part being printed, spinning fan icons, temperatures and print controls.

What's included (9 actions):

- Print Status: state, percentage, layer and progress bar

- Part Preview: the printer's picture of the part, filled from the bottom up as it prints

- Time Left: time remaining, finish time (ETA) and elapsed time

- Nozzle Temp / Bed Temp: current and target temperature with Heating / Ready status, °C or °F

- Fan: Model, Back or Side fan spinning at its real speed. Press to turn on/off or step 25-100%. Add it once per fan

- Pause / Resume, Stop (press twice within 4 s) and Light on/off

How it works:

1. Turn on LAN Mode on the printer.

2. Drag any action onto a key and enter the printer's IP address in its settings. All keys share one connection.

3. Keys update live as the printer reports changes; control keys send commands straight to the printer.

Requirements:

- Creality K1, K1C or K1 Max on the same local network (tested on a K1C with a Stream Deck XL)

- Stream Deck software 7.1 or newer

- Printer ports 9999 (status, controls) and 80 (part picture)

- Try the free Creality Monitor first to check that your printer works.

Local network only: no cloud, account or telemetry. Stop cannot be undone.

Release notes (v1.0.0 - first release)

- First release: nine live keys for Creality K1, K1C and K1 Max

- Progress bars for status, time left and temperatures

- Part Preview key with the picture of the part being printed; it switches to the printer's sharper picture once the first layer is printed

- Animated fan keys with on/off and speed steps

- Pause / Resume, two-press Stop and Light keys

- Temperatures in °C or °F (printer settings)

- Demo mode: type demo as the printer address to try it without a printer