Wave Link Connect

Wave Link Connect — Your Wave Link Mixer on the CORSAIR XENEON EDGE

Mix your audio from the touchscreen next to your keyboard. Wave Link Connect puts Elgato Wave Link's mixer on your XENEON EDGE: a fader, mute and live meter for every channel, both mixes, the output you listen on and your microphone.

No alt-tabbing, no covering your game. Wave Link Connect is laid out for the tile you give it, from the smallest to full width, landscape or portrait: what doesn't fit is left out, so nothing is ever squashed or cut off.

Key Features:

Four Designs

Console: A strip per channel, side by side: picture, name, a tall fader with its live meter, the level and a mute button.

Rows: A line per channel with a long fader. Wide tiles get columns; tall tiles get roomier rows.

Pads: A big square per channel. Tap to mute (the pad turns red), slide its fader along the bottom to set the level, and watch the level ring.

Monitor: The Personal and Stream mixes as wide faders, the output you listen on (Headphones, Speakers, …) and your microphone's mute.

Your Mix, Your Way

Pick The Mix: The faders set the Personal Mix or the Stream Mix.

Pick The Channels: Choose which channels show and in what order, or show them all. Add the mix's own fader first or last.

Live Meters: Beside the fader or inside it, updated live.

Safe By Design: A fader moves only when you slide it, never on a tap. "Show only" keeps a stray touch from changing a level at all.

One Widget, Several Jobs

Add Wave Link Connect more than once and give each copy its own design, mix and channels: a Console for your apps, Pads for quick mutes, Monitor for where you listen.

Make It Yours: Filled, thin or segmented faders, density, corners, text sizes and colours, in iCUE's widget settings or on the touchscreen. Follow iCUE's screen colours if you like.

Clear States: Wave Link closed or not installed, or Qaem Hub not running: each one shows the fix, with a button for it.

Qaem Hub (Free Companion App, Required)

Wave Link only talks to Elgato's own software, so Wave Link Connect reaches it through Qaem Hub, QaemDev's free companion app for Windows: qaemdev.com/products/qaem-hub. Switch on Wave Link in Qaem Hub and Wave Link Connect connects. No account, nothing to copy.

Just This Module: Rather not install Qaem Hub? Get the Wave Link Connect Module, a small app with only this module inside: qaemdev.com/downloads/wave-link-connect-module-setup.exe. Qaem Hub takes it over, settings kept, if you install it later.

Looks After Itself: Qaem Hub runs quietly in the tray, starts with Windows and keeps itself up to date.

Requirements

Elgato Wave Link 3 (or Wave Link 2) on Windows.

CORSAIR iCUE 5.49 or newer with a XENEON EDGE. On iCUE 5.51 and newer, allow Wave Link Connect to reach Qaem Hub on this PC (127.0.0.1) if iCUE asks, or later in iCUE Settings, Widget Access.

Privacy

Wave Link Connect talks only to Qaem Hub on your own PC, and Qaem Hub only to Wave Link on the same PC. Nothing is sent anywhere else.

Wave Link Connect is an independent widget by QaemDev. It isn't made, endorsed or supported by Elgato or Corsair; Wave Link is a trademark of Elgato.

SOME STEPS ARE REQUIRED FOR THE SETUP

SETUP GUIDE: https://qaemdev.com/guides/qaem-hub-setup

First release.